© 2014 MIMAKI ENGINEERING CO.,LTD. 6.3 P.4
R.1.1
1
2
3
4
5
6
7
INSTALLATION GUIDE > Power Supply Related > Turning the Power On
Model
JV300
Issue
2014.04.11
Revised
2014.05.08
F/W ver.
1.00
Remark
1.1
6.3 Turning the Power On
1. Turn on the main power supplies of this device.
When pushing the power switch, which is on the side of this
machine, to the “ | ” side, the main power will be on.
2. Turn the power on, by pressing the [END/POWER] key.
3. When the power is turned on, the firmware version is displayed.
To Next Page
Loading...
