MIMAKI JV300-130 - 3.3 Electrical Parts

© 2014 MIMAKI ENGINEERING CO.,LTD. 7.5 P.15
7.5 Dot Position Adjustment (User menu)
R.1.2
1
2
3
4
5
6
7
9. Correct the dot positions for pattern 2 onwards in the same way
as Step 6, then press the [ENTER] key.
10. Press the [END] key several times to finish.
DROP.POScorrect
PATTERN1 0
PATTERN2 0
PATTERN3 0
PATTERN4 0
:-40.0 〜 40.0
Print patterns 1 to 8. Each matches the following
chart.
No. Waveform Y-resolu ti on Speed
PATTERN1 WF4 360 Std
PATTERN2 WF4 540 Std
PATTERN3 WF3 540 Hi
PATTERN4 WF3 540 Std
PATTERN5 WF3 540 Hi
PATTERN6 WF3 720 Std
PATTERN7 WF3 720 Hi
PATTERN8 WF3 1440 Hi
INSTALLATION GUIDE > Outputting Plots > Dot Position Adjustment (User menu)
Model
JV300
Issue
2014.04.11
Revised
2014.06.19
F/W ver.
1.00
Remark
1.2
Rev.