MIMAKI JV300-130 - Replacement of the Cutter Assy

© 2014 MIMAKI ENGINEERING CO.,LTD. 3.1.5 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Ink Related Parts > Replacement of the Cutter Assy
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
3.1.5 Replacement of the Cutter As sy
 List of replacement procedures
Item Work operation Description Ref.
Covers
1.

Removal of covers, etc. Remove the Front cover M, L. 6.1.1
Cutter Unit
2. 
Remove the cutter unit. Remove the cutter unit. 6.2.11
3.

Mounting of the cutter unit. Mount the cutter unit.
For replacement cutter blade : SPA-107 Cutter blade
Assy.
Adjustment
4. 
Adjustment of cutter position Adjust the back and forth position of the cutter Assy. 6.1.1
Covers
5.

Mounting of the covers. Mount the covers that have been removed. 6.1.1
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Cutter Unit