MIMAKI JV300-130 - Page 57

© 2014 MIMAKI ENGINEERING CO.,LTD. 3.3.1 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Electrical Parts > Replacement of the EPL2 Main PCB Assy
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
3.3.1 Replacement of the EPL2 Main PCB Assy
 List of replacement procedures
Item Work operation Description Ref.
Advance
preparation
1.

Parameter upload Before the printed-circuit board is replaced, upload its
parameter to the PC.
Covers
2. 
Removal of covers, etc. Remove the Electrical box cover. 6.1.1
EPL2 Main
PCB Assy
3. 
Removal of the EPL2 main PCB
assy.
Remove the EPL2 main PCB assy. 6.4.1
4. 
Mounting of the EPL2 main PCB
assy.
Mount the EPL2 main PCB assy.
Check
5.

Parameter download Download the parameters which were uploaded in operation
“1”.
Covers
6. 
Mounting of the covers. Mount the covers that have been removed. 6.1.1
Turn the main power OFF when turning the power OFF.
EPL2 Main PCB Assy