MIMAKI JV300-130 - Averaging 34 Adjust

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.1 P.1
1
2
3
4
5
6
7
8
R.1.0
4.2.1 AVERAGING 34 ADJUST
 Outline
You can perform SLANT adjustment and STAGGER adjustment at the same time.
 Common Procedure
1. Move the adjusting lever to the right until the adjusting cam hits
it.
2. Select [#ADJUST] - [AVERAGING 34 ADJ.] to execute
adjustment pattern drawing.
3. Move the head over the platen.
Adjusting Lever
Adjusting Lever
Adjusting Lever
FUNCTION
#ADJUST [ENT]
#ADJUST
HEAD ADJUST [ENT]
#HEAD ADJUST
AVERAGING34ADJ. [ENT]
#AVERAGING ADJ.
** PRINTING **
Adjustment pattern
drawing
#AVERAGING ADJ.
PRINT START [ENT]
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > AVERAGING 34 ADJUST
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.