MIMAKI JV33-130BS - Other Maintenance Functions; Changing the Warning Time of Wiper Replacement

4-37
4
Routine Maintenance
Other maintenance functions
Changing the warning time of wiper replacement
The wiper is consumable. The heads are easily soiled in a dusty environment.
The heads cannot be cleaned adequately with a curled or worn wiper.
Setting the wiper level so that a warning for the wiper replacement period is indicated earlier than the stan-
dard depending on the operating environment.
1
Select [WIPER LEVEL] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [WIPER LEVEL] by pressing the keys.
2
Press the key.
3
Set the wiper level by pressing the
keys.
• Set value : 1/10 - 10/10
4
Press the key.
5
Press the key several times to end.
1/10 to 10/10
Set the time to display a warning of wiper replacement.
The smaller the value is set, the earlier the waiper replacement warning appears.
Normal wiper Deformed wiper
WI PER LEVEL
LEVEL : 1 0 /10
WI PER LEVEL
LEVEL : 9 /10
MA I NT ENANCE
WI PER LEVEL <en t >