6-2
Machine specifications
Item JV33-130BS JV33-160BS
Print head
Method Drop-on-demand piezoelectric print heads
Specification 1 head
Drawing mode (scan x feed)
720 x 540dpi
540 or 720 x 720dpi
540 x 900dpi
540 or 720 x 1080dpi
720 x 1440dpi
1440 x 1440dpi
Usable inks
Dedicated sol-
vent ink.
BS* ink
Ink supply
Supplying from ink cartridges through tubes.
Ink cartridge replacement type :
Only at 4 colors: Supplying by Toggle switchover with 2 cartridges/
color
Capacity of ink car-
tridge
Dedicated sol-
vent ink
4-color set installed :
600cc 2 cartridges for each color, 1200cc/1 color
Media type
Dedicated sol-
vent ink
Tarpaulin, FF, PVC
Max. printing width 1361mm 1610mm
Roll Media size
Maximum 1371mm 1620mm
Minimum 210mm
Thickness 1.0 mm or less
Roll outside
diameter
180mm or less
Roll weight
*1
25kg or less
Roll inside diam-
eter
3 or 2 inches
Printing surface Side facing outward
Roll end treat-
ment
The roll end is gently fixed to the core with weak-adhesive tape or
weak glue for easy removal.
Leaf media size
Maximum 1371mm 1620mm
Minimum 210mm
Margin
Leaf media
Left end and right end : 15 mm (Default)
Front : 40.0 mm
Rear : 98.5 mm
Roll media
Left end and right end : 15 mm (Default)
Front : 40.0 mm
Rear : 0.0 mm
Distance accuracy
Absolute accu-
racy
Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment 2.0mm / 3.0mm (from the platen surface) 2 levels adjustable
Cutting of media
Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type ( 2,000 cc)
To Next Page
Loading...
