MIMAKI JV33-160 - Power Supply

Color Inkjet Printer JV33-130/160
5-4
5-1-2. Power Supply
 Board name: Power supply PCB assembly (E300474)
 The input value and output values of power supply are as follows:
Input
AC100 - 120V, AC220 - 240V, 50/60Hz
Output
+3.3SBV, 5.5 A
+5SBV, 1.0 A
+5V, 4.2 A
+24V, 5.0 A
+42V, 4.0 A
<AC input connector> (CN1)
Model number (JST) : B2P3-VH (LF) (SN)
PIN Terminal n ame Type
1 AC-L AC input supply
2 (NC) (NC)
3 AC-N AC input supply
<AC HEAT input connector> (CN2)
Model number (JST) : B03P-VL * Media heater power input
PIN Terminal n ame Type
1 AC-L AC input supply
2 (NC) (NC)
3 AC-N AC input supply
<Heater connector> (CN3)
Model number (MOLEX) : 5566-22A * Connected to the media heaters (Pre, Print, and After)
The element connection of the media heater is switched
automatically according to the input voltage:
AC100-120V Parallel connection
AC220-240V Serial connection
PIN Terminal n ame Type PIN Terminal name Type
1 HEAT3-1A HEATER 12 HEAT3-1B HEATER
2 HEAT3-2A HEATER 13 HEAT3-2B HEATER
3 HEAT3-3A HEATER 14 HEAT3-3B HEATER
4 HEAT3-4A HEATER 15 HEAT3-4B HEATER
5 HEAT3-THA THERMAL 16 HEAT3-THB THERMAL
6 HEAT2-1A HEATER 17 HEAT2-1B HEATER
7 HEAT2-2A HEATER 18 HEAT2-2B HEATER
8 HEAT2-THA THERMAL 19 HEAT2-THB THERMAL
9 HEAT1-1A HEATER 20 HEAT1-1B HEATER
10 HEAT1-THB HEATER 21 HEAT1-2B HEATER
11 HEAT1-THA THERMAL 22 HEAT1-THB THERMAL