MIMAKI JV33-160 - 3-2. Overhaul of Covers; Printer Front Panel Cover Removal

Color Inkjet Printer JV33-130/160
3-4
3-2. Overhaul of Covers
The cover parts for the JV33-130/160 are as follows.
Printer Front Panel
Continued to next page ( p.3-5 )
Front Cover
1. Loosen the screws on the left and right sides (x4) and open
the cover upwards
2. Slide the cover locking parts (left and right) into the center
3. Lift the cover upwards and remove it
Y Cover C
1. Remove the screws (x4)
2. Lift the cover upwards and remove it
KB Cover
1. Remove the screws (x4)
2. Remove the cover
Right Cover
1. Remove the screws (x9)
2. Remove the cover
Maintenance Cover
1. Remove the screws (x4)
2. Remove the cover
Left Cover U
1. Remove the screws (x4)
2. Remove the cover
Station Cover
1. Remove the screws (x5)
2. Remove the cover
Head Cover
1. Remove the screws (x2)
2. Remove the cover
Roller Cover
1. Remove the screws (x4)
2. Remove the cover
Heater Connector Cover
1. Remove the screw (x1)
2. Remove the cover
Unit Frame Cover
1. Remove the screws (x2)
2. Remove the cover
Maintenance
Cover L
1. Remove the screws (x5)
2. Remove the cover