MIMAKI JV33-160 - Pump Motor

Color Inkjet Printer JV33-130/160
3-12
3-3-2. Pump Motor
1 Remove the station cover (x5 screws). (See P. 3 - 4 )
2 Remove the head cover (x2 screws). (See P. 3 - 4 )
3 Remove the pump tube that is connected
to the cap head.
4 Remove the screws (x2) and remove the
pump motor assembly.
Remove the connector as well.
5 Install by reversing the removal procedure.
The pump tube protrudes by approximately 5 mm.