MIMAKI TS34-1800A - Page 115

© 2011 MIMAKI ENGINEERING CO.,LTD.
4.3.6 P.1
1
2
3
4
5
6
7
8
R.1.0
4.3.6 Positioning of the Wiper Drive Link
 Outline
Adjust the position of the wiper drive link.
 Procedure
1. After setting the clearance between the motor base and the wiper
drive link at 0.5 mm, check whether the wiper moves smoothly.
Wiper Drive Link
0.5 mm
MAINTENANCE MANUAL > Adjustment Items > Mechanical Adjustment > Positioning of the Wiper Drive Link
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.