MIMAKI TS34-1800A - Page 205

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.9 P.1
1
2
3
4
5
6
7
8
6.4.9 X Motor Junction FFC 180 (1) and 180 (2)
 Work procedures
1. Remove the following covers.
• Y cover R
• ICU cover R
• Wiring cover
• Power unit box cover
2. Remove the block core.
3. Unlock the connector, and pull and remove the X motor junc-
tion FFC 180 (1) and 180 (2).
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
X Motor Junction FFC
X Motor Junction FFC
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > X Motor Junction FFC 180 (1) and 180 (2)
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.