Chapter 4 Maintenance
110
7
Close the waste ink tank stopper.
8
Press the [ENTER] key.
• The waste ink level will be reset.
Pinch Roller Replacement
Replace worn or dirty pinch rollers with new ones.
• The pinch rollers are small. Be careful to avoid dropping them into the product interior.
• Turn off the main power and unplug the power cable before replacing the media holder.
1
Open the front cover.
2
Raise the clamp lever.
3
Remove the O-ring retaining the pinch rollers.
4
Remove the pinch rollers.
5
Attach new pinch rollers, and secure them using the O-ring.
6
Close the front cover.
To Next Page
Loading...
