5-12
Chapter 5 Troubleshooting
MACHINE TEMP./H ***°C
The machine is hot.
• Use cooling equipment to lower the room tem-
perature to a specified range.
• Wait until the machine cools down.
• Even if you perform, if the same message is
displayed, contact a distributor in your district,
our office or our call center.
MACHINE TEMP./L ***°C
The machine is cold.
• Use a heating system to raise the room tem-
perature to a specified range.
• Wait until the machine warms up.
• Even if you perform, if the same message is
displayed, contact a distributor in your district,
our office or our call center.
Please check the hight of Jam Sensor
The height of the jam sensor is not correct.
• Match the height of the jam sensor to the
appropriate height.
MEDIA JAM
Detected media jam.
• Eliminate the media jam and press the
[ENTER] key.
If the problem can not be eliminated, contact a
distributor in your district, our office, or our call
center to call for service.
Cover Open
Detected cover open.
• Check the cover (front cover, right mainte-
nance cover, left maintenance cover), close
the cover if open, and press the [ENTER] key.
If the problem can not be eliminated, contact a
distributor in your district, our office, or our call
center to call for service.
Message Cause Solution
To Next Page
Loading...
