Front cover
Open the cover in setting of medias, taking of measures
against jamming of medias.
Even when the power button is off, keep this cover and the
other covers closed.
Operation panel
This panel has the operation keys
required for operating the machine
and the LCDs for displaying setting
items, etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold
or release the media.
Tension bar
Brings tension to the media.
Stand
Supports the main body of the
machine.
Left side maintenance cover
Open the cover in maintenance.
Even when the power button is off,
keep all covers closed.
Platen
The printed media is sent out, sliding on the platen.
Rght side maintenance cover
Open the cover in maintenance inside
the station.
Take-up unit
Take up the output
drawn with a roll
media
automatically.
Waste ink tank
Waste ink gathers in this tank.
Taking-up
Manual switch
Changes the
taking-up method
(AUTO/MANUAL).
Taking-up
direction switch
Changes the taking-
up direction
(Forward/Backward/
OFF).
Image quality confirmation LED Light
Check the state of the finish by applying a light from the
back side of the print media.
To Next Page
Loading...
