MIMAKI UJV55-320 - Displaying the Information; Displaying the Information of this Machine

3-26
Displaying the Information
1
Press the
(MENU)
in Local.
2
Press to select “Information ”,
and press the key.
• Information MENU appears.
3
Press to select a information.
• Refer to the “Information MENU”, and select the
information to be displayed.
4
Press the key.
• If you selected [List] in step 2, the machine’s
settings will be printed.
5
Press the key several times to
end the setting.
Resetting wiper use count
1
“USAGE” of Information Menu is
displayed.
(1) Press the [FUNC1] (MENU) in Local
(2) Press [][] to select “Information”, and
press the [ENTER] key twice.
2
Press to select “WIPING ”, and
press the
(  )
.
• A confirmation screen appears asking if you want
to clear the use count of the wiper.
3
Press the key to clear the counter.
• The use count of the wiper is cleared.
Checking Uv Lamp Use Time
1
“USAGE” of Information Menu is
displayed.
(1) Press the [FUNC1] (MENU) in Local
(2) Press [][] to select “Information”, and
press the [ENTER] key twice.
2
Press to select “UV LAMP”, and
press the key.
• The use time is displayed for each of the UV
lamps.
Displaying the Information of this
machine
1
Press the key in Local.
2
The information is displayed sequentially
with the (or )key.
• The information shown on the below appear.
3
Press the key to return to
Local.
Ink information
Error/ Warning
(Only at the time of
occurrence)
Machine information
(Media width/ Serial No.
/Version)
Expiration date of ink
Nozzle recovery
Nozzle check
LUS120
1. M 90% No Error
2.
C 80% No Error
3.
Y 70% No Error
4.
K 82% No Error
• if the sub tank error
has occurred, press
the [F2] key to
display the number
of the sub tank that
error occurs.
Warning
Media Undetected
Media width
3200mm
'00000000
Serial No.
V1.00
UJV55-320
17/01
17/01
17/01
17/01
M
C
Y
K
Ink Expiration
Nozzle Recovery
0
0
0
0
M
C
Y
K
Nozzle Check
0
0
0
0
M
C
Y
K