12
RACE THE LIGHTS
Number of Players: 1-2
Modes: Solo, Competitive
Difficulty Levels (Solo Mode Only): Beginner, Intermediate
and Advanced
Object: Race a blinking light to the opposite end of
the console.
SOLO MODE
1. Put on Headset 1 as described in the Quick Start section.
2. Position yourself at Player One’s side of the console.
3. Place the ball on the puck.
4. Do NOT set up any obstacles.
5. Turn on the console.
6. When the console says, “Select game,” press the TOGGLE
button until you hear “Race the Lights,” then press ENTER.
7. When the console says, “Select mode,” press the TOGGLE
button until you hear “Solo,” then press ENTER.
8. When the console says, “Select difficulty,” press the
TOGGLE button until you hear “Beginner,” “Intermediate”
or “Advanced,” then press ENTER for the desired level. The
greater the difficulty, the faster the lights will move across
the console.
9. The puck will calibrate then move to Player One’s side of
the console.
10. The console will say, “Ready? Begin”
11. As the first marker light on the console begins to flash,
concentrate to push the puck toward the opposite side
of the console as quickly as you can – the greater your
concentration, the faster the puck will move.
12. The marker lights will light up in succession, advancing
toward the opposite end of the console (the speed of the
lights depends on the difficulty level selected).
13. If the ball falls out of the airflow, place it back on the puck
where it fell off.
14. If the puck reaches the end zone on the opposite side of the
console before the lights do, the console will say, “Player
wins” then announce the time.
15. If the lights reach the end zone before the puck, the game
ends and the console will say, “Game wins.”
COMPETITIVE MODE
1. Player One puts on Headset 1 and Player Two puts on Headset
2 as described in the Quick Start section.
2. Players position themselves at opposite ends of the console –
Player One on the side marked with an orange “1” and Player
Two on the side marked with a green “2.”
3. Do NOT set up any obstacles.
4. Place the ball on the puck.
5. Turn on the console.
6. When the console says, “Select game,” press the TOGGLE
button until you hear “Race the Lights,” then press ENTER.
7. When the console says, “Select mode,” press the TOGGLE
button until you hear “Competitive,” then press ENTER.
8. The puck will calibrate then move to Player One’s side of
the console.
9. The console will say, “Player One – ready? Begin”
10. Player One concentrates to move the puck as quickly as he
can to the end zone on Player Two’s side of the console. The
marker lights will FOLLOW Player 1, moving at the same speed
and recording his time.
11. When Player One reaches the end zone on the opposite side of
the console, the game will announce his time.
12. Player Two must now beat this time
to win.
13. The puck will position itself at Player Two’s side of
the console.
14. The console will say, “Player Two – ready? Begin.”
15. As the first marker light on the console begins to flash,
Player Two concentrates to move the puck as quickly as he can
toward Player One’s side of the console.
16. The marker lights will continue to light up in succession. They
will reach the opposite end of the console in the same amount
of time that Player One just recorded.
17. If the lights reach the end zone before Player Two, the game
ends and Player One wins.
18. If Player Two reaches the end zone before the lights, the game
will announce his time.
19. The player with the fastest time wins.
To Next Page
Loading...