Operating Your Analyzer
6-21
All info mode (external keyboard needed)
Entering Edit
At the “Count” screen, press [F1] and an edit window will pop up, as Figure 6-15 shows.
Figure 6-15 Entering sample information
Entering sample ID
ENTER the ID number in the “ID” box, or if you have the bar-code scanner installed, you can
simply scan the sample ID into the analyzer.
Selecting the patient gender
SELECT
the desired item
from the “Gender” drop-down list
,
as Figure 6-16 shows. Note
that you can select blank in case you are not aware of the patient gender.
To Next Page
Loading...
