Reviewing Sample Results
7-19
Figure 7-29 “Search Result” window
7.3.2 Reviewing search result in the “Table” mode
z For every search, the analyzer can display a maximum of 500 matches.
z The matches will be deleted if you have run another sample (including
background check), or deleted a sample result, or restarted the analyzer
after the search.
Entering the “Table” mode
At the “Review” screen, press [↑] to select the “Searched” database and then press [↓] to
enter the “Table” screen, as Figure 7-30 shows.
To Next Page
Loading...
