Reviewing Sample Results
7-21
Figure 7-31 “Goto” window
ENTER the location into the “Location” box and press [ENTER] to jump to the desired
sample result.
You can select certain desired samples for transmission or printing.
Selecting/deselecting a sample result
Press [←] or [→] to move the cursor to the desired sample result and press [ENTER] to select
it. The selected sample result will be marked with a “*”, as sample “118” in Figure 7-32 shows.
Figure 7-32 Selecting a sample result
Press [ENTER] again to deselect the sample result. Once the sample is deselected, the “*”
will disappear, as Figure 7-33 shows.
To Next Page
Loading...
