Reviewing Sample Results
7-22
Figure 7-33 De-selecting a sample result
Selecting/deselecting multiple sample results
Example1: To select the sample results of locations 1 to 5 (sample IDs:114 to118 ), follow the
procedure below to do so:
1. Press [F2] to enter the “Select” window, as Figure 7-34 shows;
Figure 7-34 Entering the “Select” window
2. ENTER the start position (“00001”) into the “From” box;
3. ENTER the end position (“00005”) into the “To” box;
4. CLICK “Select” and the lower left corner of the “Select” window will display “Select
samples”, as Figure 7-35 shows;
Figure 7-35 Selecting sample results of locations 1 to 5
To Next Page
Loading...
