Using the QC Programs
8-16
Figure 8-20 “X-B Table” screen
You must empty the X-B table before editing the X-B settings. If there are saved QC results
and settings, you need to delete them first. Press [DEL] and a message box will pop up to
confirm the deletion, as Figure 8-21 shows.
Figure 8-21 Deleting all the result
CLICK
“Yes” to confirm the deletion; CLICK “No” to abort the deletion.
Entering Editing X-B Settings
At the “X-B Table” screen, press [F1] to enter the “X-B Edit” screen as shown in Figure 8-22.
Figure 8-22 “X-B Edit” screen
To Next Page
Loading...
