2-2
of the software comprise Rate Mode, Time Mode, Body Weight Mode, Ramp
Up/Down Mode, Sequential Mode, Loading Dose Mode, Micro-infusion Mode, Drug
Library, History Record and Anti-bolus Function.
The infusion pump also includes IV sets as applied parts. Since some parts and
functions are optional, the infusion pump you purchased may not contain these
additional parts and their relevant functions.
2.2 Host
2.2.1 Front View
1. Alarm light
Indicates different alarm levels using colors and frequencies, please refer to Chapter
8 Alarms for details.
2. Display
Shows the infusion parameters and details.
3. Direction of flow label
Informs the user on the proper direction of flow for infusion setup.
4. AC indicator light
On: The pump is connected to an AC power supply (including shutdown).
Off: The pump is not connected to an AC power supply.
5. Door latch
Opens the door for loading and unloading the set.
To Next Page
Loading...
