EasyManua.ls Logo

Mindray BeneFusion VP5 - Hardware Specifications; Display; Battery; Host LED

Mindray BeneFusion VP5
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-3
A.3 Hardware Specifications
A.3.1 Display
Display
Type Color LCD
Size (diagonal) 3.5 inches, ration 16:9
Differentiation 480 x 272 pixels
A.3.2 Battery
Internal battery
No. of batteries One
Battery type Lithium battery
Shutdown delay About 30mins (new battery, after the first low battery alarm)
Battery voltage 7.4VDC
Battery capacity 4800mAh
Power supply time
By factory default, continuously operate at a rate of 25ml/h,
discharge for at least 9h using a fully charged new battery;
Note: Power supply time is relevant to rate. By factory default,
continuously operate at the maximum selectable rate, typically
discharge for about 5h using a fully charged new battery.
Charging time When the pump is off, the charging time is not longer than 6h.
A.3.3 Host LED
Host LED
Alarm light 1 (red/yellow bi-color)
AC indicator light 1 (green)
Battery indicator light 1 (green)
A.3.4 Auditory Indicator
Speaker
Produce an alarm, the sound pressure is 54-73 dB(A) and key
beep; Support multi-level volume functions; The alarm sound
meets the requirements of the IEC60601-1-8.

Table of Contents

Related product manuals