6 Image Acquisition
Operator’s Manual 6 - 3
Touch screen displays (image mapping mode)
Enter the mapping mode to open the mapping menu. Tap the menus to operate.
6.1.2 Quickly Saving Image Settings
Click [Probe] > [QSave] on the touch screen or press the user-defined <QSave> key to enter the
page.
To save image parameters
Click [Save] to save the current image values for the current exam mode of the certain probe.
New Exam
Click [Create] to save the current image parameters, measurements, comments, body mark settings
to the exam mode. The system will ask for a new name of the exam.
Restore the factory default settings:
Click [Restore] to restore the probe and exam mode to factory settings.
View image parameter
Click [Show Parameter] to view the image parameter of the current exam mode and the probe.
No. Item Description
1. Menu title Displays the current image mode. Click the expand button to show the
image modes. Select the image mode if necessary.
2. Other application
mode entrance
Displays the available application modes related, click to enter the
corresponding mode.
3. Parameter
adjusting area
Displays the parameters in the current imaging mode or function.
• Value adjustment: click the parameter item. The value increases as
swiping from left to right; the value decreases as swiping from right
to left.
• ON/OFF setting: some of the parameters only can be set at ON or
OFF, ON is to activate the function.
• Parameter submenu: for the parameter with icon, tap to display
the submenu to select the desired value.
• Functional item: touch to go to the corresponding function.
• Scrollbar operation: scroll to view all items.
4. Expand button /
5. Sub-menu /
To Next Page
Loading...
