Mindray Consona N9 Exp - Page 122

6 - 8 Operator’s Manual
6 Image Acquisition
1. Press <iTouch
+
> on the control panel to turn on the function.
The symbol of iTouch
+
will be displayed in the image parameter area.
2. Long press or double press <iTouch
+
> to exit the function.
H Scale
Display or hide the width scale (horizontal scale).
The scale of the horizontal scale is the same as that of vertical scale (depth), they change together in
zoom mode, or when the number of the image window changes.The H Scale will be inverted when
image is turned upwards/downwards.
Dual Live
Display different image effects of one probe for a better observation.
Two pages of adjustable parameters are displayed on the touch screen as well; where, shared
parameters and left window parameters are displayed in the B (L) page, while right window
parameters are displayed in the B(R) page.
In the image parameter area, parameters of the both windows are displayed.
It supports the magnification of the image.
LGC
Adjust the gain along the scan line to improve the lateral resolution of the image.
TIP:
The system provides several preset parameters for imaging.
Echo Boost
The contrast is increased and the noise is decreased with the clear boundary after generating the
function.
TIP:
Use phased probe to activate the function in cardiac mode.
Ref Lines
A reference line and a help line meeting the probe icon side 45° display on the 2D image under
GYN and Pelvic Floor exam mode. This helps to locate midsagittal plane of pelvic floor precisely
and define the reference line for measurement.
TIP:
Ref Lines can be adjusted by pressing <Set> in frozen state.
Use intra-cavity probe to activate the function in GYN or Pelvic Floor exam mode.
Dehaze
This function can restrain noise, so as to enhance the contrast resolution of the image.
V 1:1
This function is to display images in vertical format in the dual-split mode. After the feature is
enabled, one image appears above, and the other image appears below.