7 - 22 Operator’s Manual
7 3D/4D
Operation Controls for Lighting Mode Settings
7.9 3D Layout
The function compiles the 3 MPRs together according to their relative positions, to provide a much
clearer interior anatomical structure.
This function is provided by the [Niche] option, and does not support Smart 3D image data.
Niche
Perform the following procedure:
1. Select the [Tools] > [3D Layout] tab on the touch screen, then tap [Niche].
2. Tap [A]/[B]/[C]/[Niche] to select the reference plane as Plane A, Plane B, Plane C or Niche.
3. Set the view direction for niche display mode using the touch screen: from the front of the
reference image or from the back.
4. Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform
axial rotation.
3Slice
Perform the following procedure:
1. Select [Tools] > [3D Layout] tab on the touch screen, then tap [3Slice].
2. Tap [A]/[B]/[C]/[3Slice] on the touch screen to select the reference plane.
3. Roll the trackball to view sectional images as necessary. Rotate <M>, <PW>, <C> to perform
axial rotation.
7.10 3D Reference Point
The function enables operators to define one or more reference points on MPRs, which are then
projected to VR image. It is helpful for operators to better understand the corresponding spatial
relations of VR image and MPRs.
Parameter Description
VL Sat. Adjust the saturation for light 1/2/3.
VL Hue Adjust the color for light 1/2/3.
VL Dis. Adjust the distance for light 1/2/3 when the light source is set to torch
or point.
The larger the distance, the more the illuminated part on the
surrounding area of the image; vice versa.
VL Angle Adjust the angle for light 1/2/3 when the light source is set to torch.
The larger the angle, the larger the scope of light beam, and the larger
the illuminated area; vice versa.
Copy to Copy the lighting mode to customized lighting mode “User 1” or
“User 2”.
Rotation Roll the trackball to view sectional images as necessary. Rotate <M>,
<PW>, <C> to perform axial rotation.
To Next Page
Loading...
