17 Probes and Biopsy
Operator’s Manual 17 - 29
a. Remove the guiding block slightly along the direction of the needle’s tail.
b. Separate the residual part of the needle-guide bracket and the probe from the needle.
4. Remove the needle-guided bracket:
Remove the support of needle-guided bracket from the probe.
NGB-009
No. Name Description
1. Hole for installing
guiding block
Used for installing the knob of fixing needle-guided bracket
2. Groove Match with the tab on the probe
3. Support of needle-guided
bracket
Used for installing the needle-guided bracket on the probe
1
6
9
10
11
7
8
5
2
3
4
To Next Page
Loading...
