2 - 20 Operator’s Manual
2 System Overview
If there is a dialog box in the screen, the mapping mode is unavailable.
• Enter the mapping mode
Flip the touch screen from top to bottom (area 1). The image on the control screen maps on the
touch screen. The mapping mode appears.
• Mapping menu operations
Swipe the touch screen from left to right (area 2) under the mapping mode. The mapping menu
appears on the touch screen. Tap or sweep right or left to adjust the image parameter, measures,
etc.
Tap the blank area on the touch screen. The menu of the mapping mode hides.
• Two-finger gesture
Two-finger gesture can be configured with varied functions.
According to the two-finger gesture under mapping or non-mapping mode, perform the
operations on the touch screen (area 3).
• Enter the preview mode
Swipe right to review the saved image under the mapping mode. Tap to review the saved
image (area 3). The tool bar is displayed on the right side of the touch screen. It is available to
review, send or delete the image.
• Exit the mapping mode
Flip from the edge to the top or tap on the top right corner of the touch screen to exit the
mapping mode.
Non-mapping mode of touch screen
The layout of the touch screen varies with the applications or modes. Flip the touch screen to go to
another page. Learn the interface display and operations by referring to related chapters.
• Controls on the touch screen
NOTE:
You cannot enter the stage from cine review mode or when there is a dialogue box on the
screen. This stage cannot switch to mapping mode.
3 The mapping menu, and toolbar are displayed. It is available to perform
the image adjustment, measures, image review, etc.
Under mapping or non-mapping mode, you can do fast operation using
the two-finger gesture according to the gesture hints on the
bottom-left of the screen.
4 Flick the edge upwards to exit.
Icon Description
Review the previous image.
Send the image.
Review the next image.
Delete the current image.
Operation area Operations
To Next Page
Loading...
