4 Setup
Operator’s Manual 4 - 19
The “Measurement Custom Wizard” dialog box appears.
3. Enter the Name in the “Measurement Custom Wizard” dialog box, select “Add Meas”, then
select [Next].
4. Select the [Tool Type], [App Region] and the Measurement Result.
Descriptions of the attributes in the dialog box are shown in the following table.
Attributes Descriptions
App Region Select the application region for the user-defined item.
Tool Type General measurement tool type of the user-defined item. E.g. Select Dist.
if you want to add a new item to measure the distance.
Has Left-Right If selected, you can choose left or right side in the measurement menu.
Has Prox-Mid-Dist If selected, you can choose proximal, middle or distal in the measurement
menu.
To Next Page
Loading...
