Mindray Consona N9 Exp - Comment Group Define; Iworks Preset; Protocol Management; View Management

4 - 26 Operator’s Manual
4 Setup
4.4.2 Comment Group Define
You can add user-defined comment group for current exam mode. The groups in the library are
provided by the system or user-defined ones.
NOTE:
You can rename, delete, add comment to, delete comment from, or change position of the selected
items in the user-defined groups, while system standard groups cannot be modified.
• Add groups: click [Add Group], position the cursor in the field box near [Lists Name], enter
the group name through the keyboard, and then click [Confirm]. Then the entered group will
be added to the Group Lists.
• Rename groups: select a user-defined group, click [Rename], enter the group name through the
keyboard, and then click [Confirm]. Then the new group name will be displayed in the group
lists.
• Delete groups: select a user-defined group, click [Delete Group]. After a user-defined group is
deleted, it will not be available.
• Add comments to groups: the operation is the same to that of the "Comment Configure" tab.
• Delete comments: select an item from the selected items and click [Delete].
• Change position of the selected items: Select an item on the right side box and click [Up],
[Down], [Left] or [Right] button to change the position of the item.
After you customize groups, click [OK] to confirm and exit the screen.
4.5 iWorks Preset
You can customize the protocols and views in the iWorks preset screen.
4.5.1 Protocol Management
• Click [Multi Select] and you can select multiple views to be copied in the list on the left.
• Click to select the protocol in the list. The protocol type can be checked on the right.
• Click [Add Protocol] to create a new protocol. It can be customized.
• Click to select a protocol in the list on the left and click [Copy]. A protocol named
“XXX_Copy1” is created with the copied views, which can be customized.
• Select a view with “Left”, “Lt”, “Right” or “Rt” in its name in the list on the left, and click
[Copy L<>R]. The selected view is copied onto a new view in which bodymarks, annotations
and measurement items are reversed to the opposite side.
• Click [Delete] to delete a user-defined protocol.
• Click [Up] or [Down] to move the selected protocol.
• Click [Move to Top]/[Move to Bottom] to move the selected protocol to the top or bottom of
the list.
4.5.2 View Management
• Click to select the views in the list. The image, annotation, body mark and measurement
settings can be checked on the right.
• Click to select a user-defined protocol in the list. Click [Add View] to add a view template to
the protocol.