Mindray Consona N9 - Smart Planes CNS; Basic Procedures for Smart Planes CNS

7 - 34 Operator’s Manual
7 3D/4D
7.15 Smart Planes CNS
The doctor finds fetus’s sagittal view by judgments on image features, and then makes an
observation. The fetus’s s sagittal view is hard to be detected or cannot be detected sometimes
because of the fetus's move inside.
Taking the key anatomical tissues and organs’ features from 3D data of fetus’s intracranial, Smart
Planes CNS is a mode-wise technology, which detects the middle of the fetus’s sagittal view,
transverse plane of thalami, transverse plane of lateral ventricles and transverse plane of
cerebellum. It helps the doctors find the sagittal view rapidly and is easy for doctors accessing the
anatomical structure on sagittal view. (such as corpus callosum, cerebellar vermis, etc.).
NOTE:
Smart Planes CNS does not support smart 3D mode.
7.15.1 Basic Procedures for Smart Planes CNS
Perform the following procedure:
1. Acquire necessary 3D data.
2. Tap [S-Planes CNS]. There are four views detected by the system, which includes TCP, TTP,
MSP and TVP.
3. Adjust the parameters to obtain the image.
4. Tap [MSP]. There are A/B/C images appearing on the screen. The sagittal plane of the fetus
appears on window C.