Mindray Consona N9 - Adding Comments

14 - 4 Operator’s Manual
14 Measurement, Comments and Body Mark
– Change active text color/fix text color: select a desired color block to change the active
text color or fix text color. The default active text color is green and fix text color is
yellow.
– Change Arrow style: Select , , or .
– Change Arrow Size: Drag the slider to select arrow size.
– Change text size: Drag the slider to select text size.
• Comment Display
Tap [Hide Text]/[Display Text] to display or hide the comments.
• Page-turning
If there is more than one page of comment texts for the current exam mode, you can slide to
view more.
• Quickly select a comment in a group
Configure groups to List 1, List 2, and List 3. Select a comment in a group by pressing the [List
1], [List 2], or [List 3]. The selected comment is displayed in the main screen synchronously.
14.2.2 Adding Comments
Adding an Comments Text
Perform the following procedure:
1. Press <ABC> to enter the comment status.
2. Use the trackball or press direction-control keys on the keyboard to move the cursor to the
desired location for comments.
3. Do one of the following to add a comment:
– Tap the desired comment text on the touch screen, the system adds the selected comment
text onto the screen where the cursor is anchored, you can edit the comment directly.
– Type the alphanumeric characters through the keyboard.
In the edit status, tap to move the cursor to the new line, and the location of the cursor is
aligned with that of the first line
4. In comments edit status, press <Set> or move the cursor to confirm the added comments text
and exit the edit status.
Adding an Arrow
You can add an arrow to a location where you want to pay attention.
Perform the following procedure:
1. Press <ABC> and then tap , or press the user-defined <Arrow> key to enter the arrow status.
2. Adjust the position and orientation of the arrow:
– Use the trackball to move the arrow to the desired position.
– Rotate the <Angle> knob to change the arrow’s orientation.
3. Press <Set> to anchor the arrow position.
Repeat steps above to add more arrows if necessary.
4. Press <ABC> or the user-defined <Arrow> key to exit the arrow comment status.
Trace
In comment status, tap [Trace] on the touch screen to activate trace function, and the current image
is also displayed on the touch screen.