Mindray DP-50 Vet - Network Preset; Istorage Preset

Setup 11-11
 You can add a printer including a network printer, or delete a printer.
 Check the printer attribute.
For details about DICOM print, please refer to “10 DICOM”.
 Printer Adapter
For details, please refer to the “Appendix D Printer Adapter”
11.7 Network Preset
For Local TCP/IP preset and DICOM preset, please refer to “10.1 DICOM Preset”.
11.7.1 iStorage Preset
The iStorage screen is as follows:
Name
Description
Service Name
Name of the device, which cannot be empty
Port
Port for transmitting.
IP Address
IP address of the PC installed with iStorage software, which cannot
be empty
Connect
Click to verify connection with the PC server. On PC server, if the
storage path has not been confirmed, a dialog box will pop up and
guide the user to set it. If the storage path on PC has already been
set, the system displays a successful connection message after
clicking this button.
Add
Click it to add the new service to the service list.
Update
Click to save the changed parameters.
Delete
Click to delete the selected service in the service list.
Default
Click to set a selected item in the list as the default iStorage server.