Minebea Intec ISEDE-16-34-64-H - Mains Connection Diagrams and Cable Lengths

Separate weighing platform mains connection
The following diagrams show the power supply options for control units and weighing
platforms:
Power supply unit on the weighing platform, max. 3 m between weighing platform and
indicator.
Mains connection on indicator, max. 3 m + 6 m extension between weighing platform and
indicator.
Mains connection on indicator and power supply unit on the weighing platform for cable
lengths over 12 m to 300 m, extension cable between weighing platform and indicator
only via an RS-485 interface.
ISEDE‑16‑34‑64‑H(V1) | ISEDE‑16‑34‑HCE | ISEDE‑64‑S(V1) | ISEDE‑64‑SCE4 Connection
Minebea IntecEN-14