4.2Data interface
The weighing platform has a standard serial RS-485 interface with a 3 m cable and a
12-pin plug; it can also be ordered with an optional RS-232. Service can convert the
standard RS-485 interface to an RS-232 interface if required.
Pin assignment
COM 1 round connection plug with a screw connection.
Front view:
RS-485 data interfaceRS-232 data interface
ARxD–TxD–Nnot in use
Bnot in useRxD
Cnot in useTxD
Dnot in useCTS
EGND-ISOGND-ISO
FCalibration/Adjustment menu access
switch
Calibration/Adjustment menu access
switch
GSupply 15 VDCSupply 15 VDC
Hnot assignedDTR
JGND-LineGND-Line
KGND-LineGND-Line
LRxD–TxD–Pnot in use
MSupply 15 VDCSupply 15 VDC
Interface connector (recommended)
Type C091D, 12-pin, Amphenol (IP65), cable types according to AWG 24
Please follow the power supply connection instructions.
4 ConnectionISEDE‑16‑34‑64‑H(V1) | ISEDE‑16‑34‑HCE | ISEDE‑64‑S(V1) | ISEDE‑64‑SCE
EN-15Minebea Intec
To Next Page
Loading...
