Minebea Intec PR 1626/60 - Page 10

The device is available in 2 versions:
- PR 1626/60: U
DC
= 12 V (nominal)/80 mA
e.g. for the connection of 4 load cells of 650 Ω, connected in parallel (162.5 Ω)
- PR 1626/61: U
DC
= 7,5 V (nominal)/92 mA
e.g. for the connection of 8 load cells of 650 Ω, connected in parallel (81.3 Ω) or for
the connection of 4 load cells of 350 Ω, connected in parallel (87.5 Ω).
The housing of the PR 1626/60, ../61 contains provisions for wall or rail mounting
according to EN 60715.
It is supplied with U
DC
= 24 V.
Connections are to be made via terminal contacts up to 4 mm
2
.
The terminal must be connected to the potential equalization system, see
Chapter 5.2.1.
The ground connection is designed for lines of at least 4 mm
2
.
Intrinsically safe load Cell interfaces PR 1626/60, ../61 3 Device Description
EN-8 Minebea Intec