Minebea Intec PR 1626/60 - Operating and Storage Conditions; Electromagnetic Compatibility (EMC); Physical Dimensions and Weight

8.5 Ambient conditions
The following indicated data only apply if the device is inspected pursuant to the ocial
testing methods. Details regarding this method and the error limits can be requested
from the local Minebea Intec organization.
Ambient temperature
Reference value +23 °C
Rated operating range -10 °C … +50 °C
0 °C … +40 °C (for 3000 e)
Limits for storage and transport -40 °C … +70 °C
Relative humidity no condensation
Reference range 45 … 75 %
Rated operating range 20 … 80 %
Limits for operation 10 … 90 %
Limits for storage and transport 5 … 95 %
Warm-up time Approx. 30 min.
Mounting position Any way that the device can be mounted on the
wall or on a 35 mm support rail EN 60715.
Protection class according to IP20 (EN 60529)
Housing lower part Makrolon 8020,
upper (connective) part Makrolon 2800
Electromagnetic emission in accordance with EN 5501, Group 1, Class A
8.6 Electromagnetic Compatibility (EMC)
The device complies with the immunity requirements according to EN 61326-1 for devices
intended for use in an industrial electromagnetic environment (Table 2).
8.7 Dimensions and Weights
Dimensions see also Chapter 5.1
H =
L =
B =
75 mm
110 mm
100 mm
Weights
net =
gross =
approx. 500 g
approx. 1000 g
Intrinsically safe load Cell interfaces PR 1626/60, ../61 8 Technical data
EN-20 Minebea Intec