Minebea Intec PR 5230 - Ethernet Port for PR 5230;30

1 2 3 4
Constant red:
Major fatal error
Constant red:
Duplicate IP address,
major error
Flashing red:
Minor recoverable
error
Flashing red:
Connection timeout
Alternating red/grn:
Self-test running.
Alternating red/grn:
Self-test running.
Legend
--- o
red red
grn green
4.6.10.3 Connection
4.6.11 Ethernet port for PR 5230/30
Note:
For the built-in Ethernet interface only.
1. Guide the cable (e.g., patch cable CAT5) into the instrument through the metal sleeve
of the cable gland, strip the insulation, and mount the supplied RJ-45 plug (see
mounting information for connector).
2. Insert the RJ-45 plug into the RJ-45 socket of the eldbus card.
3. Tighten the cable gland of the instrument.
4 Device installation Transmitter in eld housing PR 5230
EN-101 Minebea Intec