Minebea Intec PR 5230 - Setting the Xbpi Dead Load

— Baudrate for SBI
— 150 baud
— 300 baud
— 600 baud
— 1200 baud
— 2400 baud
— 4800 baud
— 9600 baud
— 19200 baud
— Parity for SBI
— Mark g
— Space kg
— Odd ct
— Even lb
— Stop bits
— 1 stop bit
— 2 stop bits
— Handshake
— software handshake
— CTS with 2 chr.pau
— CTS with 1 chr.pau
— Data output print
— on requ always
— on requ when stab
— on requ with store
— auto
— auto when stable
— Auto print
— start/stop by ESCP
— not stoppable
— Output format
— without ID 16 byte
— with ID 22 byte
— Data output interval
— with each display
— after 2 updates
— after 5 updates
— after 10 updates
— after 20 updates
— after 50 updates
— after 100 updates
— Parameter change
— can be changed
— cannot be changed
7.13.6 Setting the xBPI dead load
Note:
For Minebea Intec both terms "dead load" and "preload" are used.
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-156