Minebea Intec PR 5230 - Date and Time

7.15.2 Date and time
The date and time are set under this menu item.
The following window opens:
4. Select [Baudrate] and conrm.
A selection window opens.
5. Select the desired transmission speed and conrm.
6. Select [Stopbits] and conrm.
A selection window opens.
7. Select the desired stopbit and conrm.
8. Press two times to exit the menu and save.
1. Select [Date & Time] and conrm.
The following window opens:
7 Commissioning Transmitter in eld housing PR 5230
EN-185 Minebea Intec