Minebea Intec PR 5230 - Configuring Display

[Hostname]
NOTICE
Potential network problems
The host name must be unique in the network!
The user-dened device name is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24.
- The rst character must be a letter. Spaces are not permitted.
- 0–9, A-Z (not case-sensitive) are permitted.
- - or . may be included, but neither at the end nor in succession.
Input: via keypad
[DHCP]
If ☑ is checked (presettings: DHCP selected), the server automatically allocates the IP
address, subnet mask, and default gateway.
If ☐ is not checked, the settings [IP address], [Subnetmask] and [Default gateway] must
be dened in consultation with the responsible system administrator.
[VNC client]
This address can be used to allow access to the interface for remote access, see following
table.
User address Description
VNC client 0.0.0.0. Access via VNC not permitted.
VNC client 172.24.21.101 Access only from client machine with this address.
VNC client 172.24.21.255 Access from any client with address within range
172.24.21.1 - ..254.
VNC client 255.255.255.255 Access from client with any address.
Note:
When setting [IP Address], [Subnetmask], and [Default gateway], please consult with
your system administrator.
Press to return to the Setup menu and to save the changes.
7.15.7 Conguring display
The lines of the display are set under this menu item.
Open the menu via -[Display items] .
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-194