Minebea Intec PR 5230 - Displaying Pendeo Data

7.16.4 Displaying Pendeo data
1. Select [Show HW-slots] and conrm.
1st line
Standard interface, serial
2nd line
Standard interface, analog outputs
3rd line
Standard interface, digital I/Os
4th line
Slot A, weighing electronics
The tool tip displays the weighing point serial number and manufacturing date of
the factory.
This line shows the following device statuses:
2. Press to return to the previous window.
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-212