Minebea Intec PR 5230 - Configuring Material

Note:
The SPM address %MX for an unused digital output = 0.
8.3.3 Conguring material
The materials (products) 110 are congured under the [Conguration material] menu
item.
5. Select [Conguration digital outputs] and conrm.
6. Select outputs 13. Use the keypad to enter and conrm a corresponding SPM
address %MXxxx (see Chapter 13.4).
7. Press to exit the window and to save the changes.
Transmitter in eld housing PR 5230 8 Production
Minebea Intec EN-222