Minebea Intec PR 5230 - 17 Specifications; Note on Using Free Software; Decoding the Serial Number; General Data

17 Specications
17.1 Note on using "Free Software"
The rmware in the PR 5230 instrument contains free software that is licensed under
- GNU General Public License (GPL) Version 2, June 1991, and
- GNU Lesser General Public License (LGPL) Version 2.1, February 1999.
This third-party developed "free software" is copyrighted and is provided free of charge.
The license terms and conditions of Free Software Foundation, Inc. in English are included
in the delivery of the instrument. The source text with the terms can be found on the
enclosed CD-ROM.
17.2 Decoding the serial number
30 252 00015
30 252 00015
Location no.:
30 = Hamburg
Code for the year/month:
252* = April 2010
Current number
* Is increment according to the year group table of Minebea Intec.
17.3 General data
Note:
For additional specications see Option WE1 additional information.
The following characteristics are valid after a warm-up time of at least 60 minutes
(reference temperature 23°C).
17.3.1 Backup battery for time/date
The lithium battery for backing up the date/time chip is activated before the instrument
leaves the factory.
Device continuously connected to mains voltage 10 yearsLifespan
Device not connected to mains voltage for some time
(e.g.in storage)
7 years
17.3.2 Supply voltage connection 230 V AC
Supply voltage 100 V-240 V AC +10%/-15%, 50/60 Hz
Max. power consumption 12 W/15 VA
Primary fuse 2× 3.15 AT; 250 V; IR 1500 A; 5×20 mm;
e.g.: Schurter Company: SPT5×20, Order
number: 0001.2509
Transmitter in eld housing PR 5230 17 Specications
Minebea Intec EN-294