Minebea Intec PR 5230 - Supply Voltage Connection 24 V AC; Effect of Ambient Conditions; Ambient Conditions; Electromagnetic Compatibility (EMC)

17.3.3 Supply voltage connection 24 V AC
Supply voltage 24 V DC -15%/+20%
Max. power consumption 12 W
Primary fuse 2× 3.15 AT; 250 V; IR 1500 A; 5×20 mm;
e.g.: Schurter Company: SPT5×20, Order
number: 0001.2509
17.4 Eect of ambient conditions
17.4.1 Ambient conditions
Reference temperature 23 °C
Ambient temperature for operation
-10+50 °C
Ambient temperature for use in legal met-
rology
Ambient temperature in Ex Area
-10+40 °C
Power-on temperature
0+50 °C
Temperature range
Limits for storage/transport
-20+70 °C
Moisture <95 %, non-condensing (acc. to IEC 68-2)
Protection class Housing: IP 66
Altitude < 2000 m
17.4.2 Electromagnetic Compatibility (EMC)
All data in compliance with NAMUR NE 21, EN 45501 and EN 61326.
High frequency electromagnetic elds
(803000 MHz)
EN 61000-4-3 10 V/mHousing
Electrostatic discharge (ESD) EN 61000-4-2 6/8 kV
Fast transients (burst) EN 61000-4-4 3 kV
Peak voltages (surge) 1.2/50 µs EN 61000-4-5 2 kV
Signal and control
lines
Conducted disturbances by high fre-
quency (0.1580 MHz)
EN 61000-4-6 10 V
Fast transients (burst) EN 61000-4-4 3 kV
Peak voltages (surge) 1.2/50 µs EN 61000-4-5 1/2 V
Conducted disturbances by high fre-
quency (0.1580 MHz)
EN 61000-4-6 10 V
Voltage dips EN 61000-4-11 0/40/70%
20/200/500ms
Mains inputs
Mains failure link EN 61000-4-11 5 s
17 Specications Transmitter in eld housing PR 5230
EN-295 Minebea Intec