Minebea Intec PR 5310/12 - Data Backup and Overwrite Protection

5. Getting started | 5.6 - Overwrite protection | 86
5.6 Overwrite protection
5.6.1 CAL switch
Overwrite protection can be activated via a CAL switch to protect the
metrological parameters against unauthorized access.
Panel device
The CAL switch(1) is located on the rear of the device.
Table-top device
CAL switch is located on the mainboard and is accessible on the rear of the
device, see ChapterTable-top device.
Write protec
tion activated
Write protec
tion not activated
CAL switch
closed
opened