6. Operating | 6.2 - Configuration and adjustment via the keypad | 118
nonE appears on the display.
10. Press / to select the condition b16=1 (in this case, condition limit1
off = active), see Chapter Setting conditions.
11. Press "OK".
dI 044 appears on the display.
Input 1 off
12. Press "OK".
InP.1of appears on the display.
13. Press "OK".
IoF.ACt appears on the display.
14. Press "OK".
no.ACt appears on the display.
15. Press / to select an action, see Chapter Defining actions.
16. Press "OK".
IoF.Cnd appears on the display.
17. Press "OK".
nonE appears on the display.
18. Press / to select a condition, see Chapter Setting conditions.
19. Press "OK".
dI 045 appears on the display.
20. Perform the same steps for [Input 2 on/off] and [Input 3 on/off] in the
menus dI 046 … dI 048.
21. Press "Exit".
22. Save the changes.
To Next Page
Loading...
