Minebea Intec PR 5310 - Weighing Point Error Numbers

11. Error messages | 11.3 - Error numbers @ "LAST_ERROR" | 177
11.3 Error numbers @ "LAST_ERROR"
11.3.1 Weighing point errors
Number Display Cause
6 test active Test is active, no weights.
7 cal active Adjustment is active, no weights.
8 no standstill No standstill of the scale.
13 tare is active Tare is active.
16 weight has error Weight error.
17 scale not ready Scale is not ready.
18 cannot tare below
zero
Taring below zero is not possible.
142 cal active During adjustment, taring and zeroing is
not possible.
147 no zeroset Zeroset outside of the zero setting range
is not possible.
149 busy The scale is currently busy with another
query.
255 hardware error Weighing point is faulty.