118
Procedures
3
Select the Function No. desired to set with the
right keys.
Suspend the setting of Function mode, then
Measurement mode can be re−entered by
pressing the
key.
By pressing the key continuously,
continuous increase will be provided.
key ：Set value carry key
key ：Set value inclement key
key ：Set value initialization key
4
Press the key.
Content of setting Function that has selected will
be displayed and the digit of 10
0
will flash on and
off.
Change the setting with the right keys.
Press the
key to suspend the setting of
Function mode, then return to the measurement
mode.
By pressing the key continuously,
continuous increase will be provided.
key ：Set value carry key
key ：Set value inclement key
key ：Set value initialization key
5
Press the key.
The set contents are registered, then the load
display returns to the registered Function No.,
and the 10
0
digit will flash on and off.
Press the
key.
Setting another Function No. is desired, return
to step 3.
To Next Page
